/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2011 by Amaury Pouly * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #ifndef __IMX233_H__ #define __IMX233_H__ #ifndef IMX233_SUBTARGET #error You must define IMX233_SUBTARGET to select the chip family #endif #ifndef IMX233_PACKAGE #error You must IMX233_PACKAGE to select the chip package #endif /* * Chip Memory Map (stmp3700,imx233): * 0x00000000 - 0x00007fff: on chip ram * 0x40000000 - 0x5fffffff: dram (512Mb max) * 0x80000000 - 0x80100000: memory mapped registers * We use the following map: * 0x60000000 - 0x7fffffff: dram (cached) * 0x90000000 - 0xafffffff: dram (buffered) * everything else : identity mapped (uncached) * * Chip Memory Map (stmp3600): * 0x00000000 - 0x00007fff: on chip ram * 0x60000000 - 0x7fffffff: dram (512Mb max) * 0x80000000 - 0x80100000: memory mapped registers * We use the following map: * 0x40000000 - 0x5fffffff: dram (cached) * 0x90000000 - 0xafffffff: dram (buffered) * everything else : identity mapped (uncached) * * As a side note it's important to notice that uncached dram is identity mapped */ #define IRAM_ORIG 0 #if IMX233_SUBTARGET >= 3780 #define IRAM_SIZE (32 * 1024) #elif IMX233_SUBTARGET >= 3770 #define IRAM_SIZE (512 * 1024) #else #define IRAM_SIZE (256 * 1024) #endif #if IMX233_SUBTARGET >= 3700 #define DRAM_ORIG 0x40000000 #else #define DRAM_ORIG 0x60000000 #endif #define DRAM_SIZE (MEMORYSIZE * 0x100000) #if IMX233_SUBTARGET >= 3700 #define UNCACHED_DRAM_ADDR 0x40000000 #define CACHED_DRAM_ADDR 0x60000000 #define BUFFERED_DRAM_ADDR 0x90000000 #else #define UNCACHED_DRAM_ADDR 0x60000000 #define CACHED_DRAM_ADDR 0x40000000 #define BUFFERED_DRAM_ADDR 0x90000000 #endif /* 32 bytes per cache line */ #define CACHEALIGN_SIZE 32 #define CACHEALIGN_BITS 5 #define NOCACHE_BASE (UNCACHED_DRAM_ADDR - CACHED_DRAM_ADDR) #define __IN_RANGE(type, a) (type##_DRAM_ADDR <= (a) && (a) < (type##_DRAM_ADDR + DRAM_SIZE)) #define PHYSICAL_ADDR(a) \ ((typeof(a))(__IN_RANGE(BUFFERED, (uintptr_t)(a)) ? \ ((uintptr_t)(a) - BUFFERED_DRAM_ADDR + UNCACHED_DRAM_ADDR) \ :__IN_RANGE(CACHED, (uintptr_t)(a)) ? \ ((uintptr_t)(a) - CACHED_DRAM_ADDR + UNCACHED_DRAM_ADDR) \ :(uintptr_t)(a))) #define UNCACHED_ADDR(a) PHYSICAL_ADDR(a) #define TTB_BASE_ADDR (DRAM_ORIG + DRAM_SIZE - TTB_SIZE) #define TTB_SIZE 0x4000 #define TTB_BASE ((unsigned long *)TTB_BASE_ADDR) /* align to cache line */ #ifndef IMX233_FRAMEBUFFER_SIZE #define IMX233_FRAMEBUFFER_SIZE (LCD_WIDTH * LCD_HEIGHT * LCD_DEPTH / 8) #endif #define FRAME_SIZE ((IMX233_FRAMEBUFFER_SIZE + CACHEALIGN_SIZE - 1) & ~(CACHEALIGN_SIZE - 1)) #define FRAME_PHYS_ADDR (DRAM_ORIG + DRAM_SIZE - TTB_SIZE - FRAME_SIZE) #define FRAME ((void *)(FRAME_PHYS_ADDR - UNCACHED_DRAM_ADDR + BUFFERED_DRAM_ADDR)) /* Timer runs at 32KHz, derived from clk32k@32KHz */ #define TIMER_FREQ 32000 /* USBOTG */ #define USB_QHARRAY_ATTR __attribute__((section(".qharray"),nocommon,aligned(2048))) #define USB_NUM_ENDPOINTS 5 /* STMP3600 doesn't have the bandwidth to put buffer in SDRAM */ #if IMX233_SUBTARGET < 3700 #define USB_DEVBSS_ATTR IBSS_ATTR #else #define USB_DEVBSS_ATTR NOCACHEBSS_ATTR #endif #define USB_BASE 0x80080000 #define ___ENSURE_ZERO(line, x) static uint8_t __ensure_zero_##line[-(x)] __attribute__((unused)); #define __ENSURE_ZERO(x) ___ENSURE_ZERO(__LINE__, x) #define __ENSURE_MULTIPLE(x, y) __ENSURE_ZERO((x) % (y)) #define __ENSURE_CACHELINE_MULTIPLE(x) __ENSURE_MULTIPLE(x, 1 << CACHEALIGN_BITS) #define __ENSURE_STRUCT_CACHE_FRIENDLY(name) __ENSURE_CACHELINE_MULTIPLE(sizeof(name)) #define __REG_SET(reg) (*((volatile uint32_t *)(® + 1))) #define __REG_CLR(reg) (*((volatile uint32_t *)(® + 2))) #define __REG_TOG(reg) (*((volatile uint32_t *)(® + 3))) #define __REG_SET_CLR(reg, set) \ (*((volatile uint32_t *)(® + (set ? 1 : 2)))) #define __BLOCK_SFTRST (1 << 31) #define __BLOCK_CLKGATE (1 << 30) #define __XTRACT(reg, field) ((reg & reg##__##field##_BM) >> reg##__##field##_BP) #define __XTRACT_EX(val, field) (((val) & field##_BM) >> field##_BP) #define __FIELD_SET(reg, field, val) reg = (reg & ~reg##__##field##_BM) | (val << reg##__##field##_BP) #define __FIELD_SET_CLR(reg, field, set) __REG_SET_CLR(reg, set) = reg##__##field /** * Register Naming Scheme * * => Devices * * Each device has its base address defined as REGS__base: * * Example: * #define REGS_APBHBASE (0x80004000) * #define REGS_SSPBASE(i) ((i) == 1 ? 0x80010000 : 0x80034000) * * => Registers * * Each register in device has its address(es) defined as * HW__[_{SET,CLR,TOG}] * * Examples: * #define HW_APBH_CTRL1 (*(volatile unsigned long *)(REGS_APBHBASE + 0x10 + 0)) * #define HW_APBH_CHn_CURCMDAR(n) (*(volatile unsigned long *)(REGS_APBHBASE + 0x40+(n)*0x70)) * #define HW_SSP_CTRL0_SET(d) (*(volatile unsigned long *)(REGS_SSPBASE(d) + 0 + 0x4)) * * => Fields * * Each field in register in device has its bit position * and bitmask defined as {BP,BM}___ * * Examples: * * * */ /** * Register macros: * * BF_SET(reg, field): equivalent to HW_reg_SET = BM_reg_field; * BF_CLR(reg, field): same with CLR * BF_TOG(reg, field): same with TOG * * BF_SETV(reg, field, v): equivalent to HW_reg_SET = BF_reg_field(v) * BF_CLRV(reg, field, v): same with CLR * BF_TOGV(reg, fielf, v): same with TOG * * BF_RD(reg, field): equivalent to (HW_reg & BM_reg_field) >> BP_reg_field * BF_WR(reg, field, v): equivalent to HW_reg = (HW_reg & ~BM_reg_field) | (((v << BP_reg_field) & BM_reg_field) * BF_WR_V(reg, field, sym): BF_WR(reg, field, BV_reg_field__sym) * * BF_{SET,CLR,TOG}[V]n(reg, n, field): same for multi registers * * The BF_RDX(val, reg, field) reads from the value provided instead of the register * Similarly for BF_WRX * */ /** * Handy macros for mutliple operations at once * * BF_ORp(reg, f1,, ..., fp) is equivalent to * BF_reg_f1 | ... | BF_reg_fp * * BM_ORp is similar with BM_ * * There exist some variadic variants which do not need to write the number * of parameters, if supported by the compiler: * * BF_OR(reg, f1, ..., fn) * BM_OR(reg, f1, ..., fn) */ #endif /* __IMX233_H__ */