/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2002 Randy D. Wood * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "lcd.h" #ifdef HAVE_REMOTE_LCD #include "lcd-remote.h" #endif #include "scroll_engine.h" #include "thread.h" #include "kernel.h" #include "button.h" #include "file.h" #include "audio.h" #include "system.h" #include "i2c.h" #include "adc.h" #include "string.h" #include "core_alloc.h" #include "storage.h" #include "rolo.h" #include "loader_strerror.h" #if defined(MI4_FORMAT) #include "crc32-mi4.h" #include "mi4-loader.h" #if defined(HAVE_BOOTDATA) && !defined(SIMULATOR) #include "bootdata.h" #include "crc32.h" extern int write_bootdata(unsigned char* buf, int len, unsigned int boot_volume); /*mi4-loader.c*/ #endif #define LOAD_FIRMWARE(a,b,c) load_mi4(a,b,c) #elif defined(RKW_FORMAT) #include "rkw-loader.h" #define LOAD_FIRMWARE(a,b,c) load_rkw(a,b,c) #else #include "rb-loader.h" #if defined(HAVE_BOOTDATA) && !defined(SIMULATOR) #include "bootdata.h" #include "crc32.h" extern int write_bootdata(unsigned char* buf, int len, unsigned int boot_volume); /*rb-loader.c*/ #endif #define LOAD_FIRMWARE(a,b,c) load_firmware(a,b,c) #endif #if CONFIG_CPU == AS3525v2 #include "ascodec.h" #endif #if !defined(IRIVER_IFP7XX_SERIES) /* FIX: this doesn't work on iFP */ #define IRQ0_EDGE_TRIGGER 0x80 static int rolo_handle; #ifdef CPU_PP /* Handle the COP properly - it needs to jump to a function outside SDRAM while * the new firmware is being loaded, and then jump to the start of SDRAM * TODO: Use the mailboxes built into the PP processor for this */ #if NUM_CORES > 1 volatile unsigned char IDATA_ATTR cpu_message = 0; volatile unsigned char IDATA_ATTR cpu_reply = 0; extern int cop_idlestackbegin[]; void rolo_restart_cop(void) ICODE_ATTR; void rolo_restart_cop(void) { if (CURRENT_CORE == CPU) { /* There should be free thread slots aplenty */ create_thread(rolo_restart_cop, cop_idlestackbegin, IDLE_STACK_SIZE, 0, "rolo COP" IF_PRIO(, PRIORITY_REALTIME) IF_COP(, COP)); return; } COP_INT_DIS = -1; /* Invalidate cache */ commit_discard_idcache(); /* Disable cache */ CACHE_CTL = CACHE_CTL_DISABLE; /* Tell the main core that we're ready to reload */ cpu_reply = 1; /* Wait while RoLo loads the image into SDRAM */ /* TODO: Accept checksum failure gracefully */ while(cpu_message != 1); /* Acknowledge the CPU and then reload */ cpu_reply = 2; asm volatile( "bx %0 \n" : : "r"(DRAM_START) ); } #endif /* NUM_CORES > 1 */ #endif /* CPU_PP */ static void rolo_error(const char *text) { rolo_handle = core_free(rolo_handle); lcd_clear_display(); lcd_puts(0, 0, "ROLO error:"); lcd_puts_scroll(0, 1, text); lcd_update(); button_get(true); button_get(true); button_get(true); lcd_scroll_stop(); } #if CONFIG_CPU == IMX31L || CONFIG_CPU == RK27XX /* this is in firmware/target/arm/imx31/rolo_restart.c for IMX31 */ /* this is in firmware/target/arm/rk27xx/rolo_restart.c for rk27xx */ extern void rolo_restart(const unsigned char* source, unsigned char* dest, int length); #else /* explicitly put this code in iram, ICODE_ATTR is defined to be null for some targets that are low on iram, like the gigabeat F/X */ void rolo_restart(const unsigned char* source, unsigned char* dest, long length) __attribute__ ((section(".icode"))); void rolo_restart(const unsigned char* source, unsigned char* dest, long length) { long i; unsigned char* localdest = dest; /* This is the equivalent of a call to memcpy() but this must be done from iram to avoid overwriting itself and we don't want to depend on memcpy() always being in iram */ for(i = 0;i < length;i++) *localdest++ = *source++; #if defined(CPU_COLDFIRE) asm ( "movec.l %0,%%vbr \n" "move.l (%0)+,%%sp \n" "move.l (%0),%0 \n" "jmp (%0) \n" : : "a"(dest) ); #elif defined(CPU_PP) CPU_INT_DIS = -1; /* Flush cache */ commit_discard_idcache(); /* Disable cache */ CACHE_CTL = CACHE_CTL_DISABLE; /* Reset the memory mapping registers to zero */ { volatile unsigned long *mmap_reg; for (mmap_reg = &MMAP_FIRST; mmap_reg <= &MMAP_LAST; mmap_reg++) *mmap_reg = 0; } #if NUM_CORES > 1 /* Tell the COP it's safe to continue rebooting */ cpu_message = 1; /* Wait for the COP to tell us it is rebooting */ while(cpu_reply != 2); #endif asm volatile( "bx %0 \n" : : "r"(DRAM_START) ); #elif defined(CPU_ARM) /* Flush and invalidate caches */ commit_discard_idcache(); asm volatile( "bx %0 \n" : : "r"(dest) ); #elif defined(CPU_MIPS) commit_discard_idcache(); asm volatile( "jr %0 \n" "nop\n" : : "r"(dest) ); #endif } #endif /* This is assigned in the linker control file */ extern unsigned long loadaddress; /*************************************************************************** * * Name: rolo_load(const char *filename) * Filename must be a fully defined filename including the path and extension * ***************************************************************************/ int rolo_load(const char* filename) { unsigned char* ramstart = (void*)&loadaddress; unsigned char* filebuf; size_t filebuf_size; int err, length; lcd_clear_display(); lcd_puts(0, 0, "ROLO..."); lcd_puts(0, 1, "Loading"); lcd_update(); #ifdef HAVE_REMOTE_LCD lcd_remote_clear_display(); lcd_remote_puts(0, 0, "ROLO..."); lcd_remote_puts(0, 1, "Loading"); lcd_remote_update(); #endif audio_hard_stop(); /* get the system buffer. release only in case of error, otherwise * we don't return anyway */ rolo_handle = core_alloc_maximum("rolo", &filebuf_size, NULL); if (rolo_handle < 0) { rolo_error("OOM"); return -1; } filebuf = core_get_data(rolo_handle); err = LOAD_FIRMWARE(filebuf, filename, filebuf_size); #if defined(HAVE_BOOTDATA) && !defined(SIMULATOR) /* write the bootdata as if rolo were the bootloader */ unsigned int crc = 0; if (strcmp(filename, BOOTDIR "/" BOOTFILE) == 0) crc = crc_32(boot_data.payload, boot_data.length, 0xffffffff); if(crc > 0 && crc == boot_data.crc) write_bootdata(filebuf, filebuf_size, boot_data.boot_volume); /* rb-loader.c */ #endif if (err <= 0) { rolo_error(loader_strerror(err)); return -1; } else length = err; #if defined(CPU_PP) && NUM_CORES > 1 lcd_puts(0, 2, "Waiting for coprocessor..."); lcd_update(); rolo_restart_cop(); /* Wait for COP to be in safe code */ while(cpu_reply != 1); lcd_puts(0, 2, " "); lcd_update(); #endif #ifdef HAVE_STORAGE_FLUSH lcd_puts(0, 1, "Flushing storage buffers"); lcd_update(); storage_flush(); #endif lcd_puts(0, 1, "Executing"); lcd_update(); #ifdef HAVE_REMOTE_LCD lcd_remote_puts(0, 1, "Executing"); lcd_remote_update(); #endif adc_close(); #if CONFIG_CPU == AS3525v2 /* Set CVDD1 power supply to default*/ ascodec_write_pmu(0x17, 1, 0); #endif #if defined(SANSA_FUZEV2) || defined(SANSA_CLIPPLUS) || defined(SANSA_CLIPZIP) /* It is necessary for proper detection AMSv2 variant 1. * We should restore initial state of GPIOB_PIN(5) as it used for * variant detection, but can be changed if we switch SD card. */ if (amsv2_variant == 1) GPIOB_PIN(5) = 1 << 5; #endif #if CONFIG_CPU != IMX31L /* We're not finished yet */ #ifdef CPU_ARM /* Should do these together since some ARM version should never have * FIQ disabled and not IRQ (imx31 errata). */ disable_interrupt(IRQ_FIQ_STATUS); #else /* Some targets have a higher disable level than HIGEST_IRQ_LEVEL */ set_irq_level(DISABLE_INTERRUPTS); #endif #endif /* CONFIG_CPU == IMX31L */ rolo_restart(filebuf, ramstart, length); /* never reached */ return 0; } #else /* !defined(IRIVER_IFP7XX_SERIES) */ int rolo_load(const char* filename) { /* dummy */ (void)filename; return 0; } #endif /* !defined(IRIVER_IFP7XX_SERIES) */