/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright © 2008 Rafaël Carré * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #ifndef CLOCK_TARGET_H #define CLOCK_TARGET_H #include "config.h" #include "cpu.h" /* returns clock divider, given maximal target frequency and clock reference */ #define CLK_DIV(ref, target) ((ref + target - 1) / target) /* Frequency and Bus Settings * These bus settings work on the assumption that unboosted performance will be * based on fastbus mode(FCLK == PCLK) at a frequency configured with this file. * Boosted performance defaults to synchronous bus but will be changed to * asynchronous bus if FCLK is not an integer multiple of PCLK. * The player starts up in fastbus mode and synchronous or asynchronous mode is * implemented in the set_cpu_frequency() function in system-as3525.c. There * are limitations on both frequencies and frequency relationships listed in 7.3.14 * of the as3525 datasheet that need to be observed. If you are determined to * use a frequency that is not "legal" you can do that. There are no checks for * legal frequency values, only some validity checks to make sure the divider * value fits into the number of bits allotted to it. * * The CLOCK_DIV macro does a pretty good job at selecting divider values but * you can always override it by choosing your own value and commenting out the * macro. AS3525_FCLK_PREDIV values other than 0 allow you to choose frequencies * from lines below the main PLL frequency lines. AS3525_FCLK_POSTDIV * will be calculated automagically depending on the value you have selected * for AS3525_FCLK_FREQ. You may add more PLL frequencies by simply commenting * out the current #defines for AS3525_PLLA_FREQ & AS3525_PLLA_SETTING and * adding a #define for FREQ and divider setting to produce that frequency.I * have included USB & PLLB for future use but commented them out for now. */ /* Clock Sources */ #define AS3525_CLK_MAIN 0 #define AS3525_CLK_PLLA 1 #define AS3525_CLK_PLLB 2 #define AS3525_CLK_FCLK 3 /* Available as PCLK input only */ /** ************ Change these to reconfigure clocking scheme *******************/ #if CONFIG_CPU == AS3525v2 /* PLLA & PLLB registers differ from AS3525(v1) * PLL bits: * - bit 0-6 = F-1 (F=multiplier) * - bit 7-9 = R-1 (R=divisor) * - bit 10 = OD (output divider)? Divides by 2 if set. * - bit 11 = unknown (no effect) * - bit 12 = unknown (always set to 1) * Fpll = Fin * F / (R * OD), where Fin = 12 MHz */ #define AS3525_PLLA_FREQ 192000000 /* allows 44.1kHz with 0.04% error*/ #define AS3525_PLLA_SETTING 0x155F #define AS3525_FCLK_PREDIV 0 #define AS3525_FCLK_FREQ AS3525_PLLA_FREQ /* XXX: CGU_PERI might also be different (i.e. no PCLK_DIV1_SEL), so we don't * set bit 6 (PCLK_DIV1_SEL) for the moment * * Note that setting bits 1:0 have no effect and they always read back as 0 * Also note that CGU_PERI is based on fclk, not PLLA */ #define AS3525_DRAM_FREQ 96000000 /* Initial DRAM frequency */ #else /* AS3525v1 */ /* PLL frequencies and settings*/ #define AS3525_PLLA_FREQ 248000000 /*124,82.7,62,49.6,41.3,35.4 */ /* FCLK_PREDIV-> *7/8 = 217MHz 108.5 ,72.3, 54.25, 43.4, 36.17 */ /* *6/8 = 186MHz 93, 62, 46.5, 37.2 */ /* *5/8 = 155MHz 77.5, 51.67, 38.75 */ #define AS3525_PLLA_SETTING 0x261F /* PLLB frequencies and settings (audio and USB) */ #define AS3525_PLLB_FREQ 384000000 /* allows 44.1kHz with 0.04% error*/ #define AS3525_PLLB_SETTING 0x2630 //#define AS3525_PLLA_FREQ 384000000 /*192,128,96,76.8,64,54.9,48,42.7,38.4*/ /* FCLK_PREDIV-> *7/8 = 336MHz 168, 112, 84, 67.2, 56, 48, 42, 37.3*/ /* *6/8 = 288MHz 144, 96, 72, 57.6, 48, 41.1, */ /* *5/8 = 240MHz 120, 80, 60, 48, 40 */ //#define AS3525_PLLA_SETTING 0x2630 #define AS3525_FCLK_PREDIV 0 /* div = (8-n)/8 Enter manually & postdiv will be calculated*/ /* 0 gives you the PLLA 1st line choices, 1 the 2nd line etc. */ #define AS3525_FCLK_FREQ 248000000 /* Boosted FCLK frequency */ #define AS3525_DRAM_FREQ 62000000 /* Initial DRAM frequency */ /* AS3525_PCLK_FREQ != AS3525_DRAM_FREQ/1 will boot to white lcd screen */ #endif /* CONFIG_CPU == AS3525v2 */ #define AS3525_PCLK_FREQ (AS3525_DRAM_FREQ/1) /* PCLK divided from DRAM freq */ #define AS3525_DBOP_FREQ (AS3525_PCLK_FREQ/1) /* DBOP divided from PCLK freq */ /** ****************************************************************************/ /* Tell the software what frequencies we're running */ #define CPUFREQ_MAX AS3525_FCLK_FREQ #define CPUFREQ_DEFAULT 38400000 #define CPUFREQ_NORMAL CPUFREQ_DEFAULT /* FCLK */ #define AS3525_FCLK_SEL AS3525_CLK_PLLA #define AS3525_FCLK_POSTDIV (CLK_DIV((AS3525_PLLA_FREQ*(8-AS3525_FCLK_PREDIV)/8), AS3525_FCLK_FREQ) - 1) /*div=1/(n+1)*/ #if CONFIG_CPU == AS3525v2 #define AS3525_FCLK_POSTDIV_UNBOOSTED (CLK_DIV((AS3525_PLLA_FREQ*(8-AS3525_FCLK_PREDIV)/8), CPUFREQ_NORMAL) - 1) /*div=1/(n+1) */ /* Since pclk is based on fclk, we need to change CGU_PERI as well */ #define AS3525_PCLK_DIV0_UNBOOSTED (CLK_DIV(CPUFREQ_NORMAL, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/ #endif /* CONFIG_CPU == AS3525v2 */ /* MCLK */ #define AS3525_MCLK_SEL AS3525_CLK_PLLA #define AS3525_MCLK_FREQ AS3525_PLLA_FREQ /* PCLK */ #if CONFIG_CPU == AS3525 #define AS3525_PCLK_SEL AS3525_CLK_PLLA /*unable to use AS3525_PCLK_DIV1 != 0 successfuly so far*/ #define AS3525_PCLK_DIV1 (CLK_DIV(AS3525_DRAM_FREQ, AS3525_PCLK_FREQ) - 1)/* div = 1/(n+1)*/ #define AS3525_PCLK_DIV0 (CLK_DIV(AS3525_PLLA_FREQ, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/ #else #define AS3525_PCLK_SEL AS3525_CLK_FCLK #define AS3525_PCLK_DIV0 (CLK_DIV(AS3525_FCLK_FREQ, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/ #endif /* CONFIG_CPU */ /* PCLK as Source */ #define AS3525_DBOP_DIV (CLK_DIV(AS3525_PCLK_FREQ, AS3525_DBOP_FREQ) - 1) /*div=1/(n+1)*/ #define AS3525_I2C_PRESCALER CLK_DIV(AS3525_PCLK_FREQ, AS3525_I2C_FREQ) #define AS3525_I2C_FREQ 400000 #define AS3525_SD_IDENT_DIV ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SD_IDENT_FREQ) / 2) - 1) #define AS3525_SD_IDENT_FREQ 400000 /* must be between 100 & 400 kHz */ #define AS3525_SSP_PRESCALER ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SSP_FREQ) + 1) & ~1) /* must be an even number */ #define AS3525_SSP_FREQ 12000000 #define AS3525_IDE_SEL AS3525_CLK_PLLA /* Input Source */ #define AS3525_IDE_DIV (CLK_DIV(AS3525_PLLA_FREQ, AS3525_IDE_FREQ) - 1)/*div=1/(n+1)*/ #if CONFIG_CPU == AS3525v2 #define AS3525_MS_FREQ 120000000 #define AS3525_MS_DIV (CLK_DIV(AS3525_PLLA_FREQ, AS3525_MS_FREQ) -1) #define AS3525_SDSLOT_FREQ 24000000 #define AS3525_SDSLOT_DIV (CLK_DIV(AS3525_PLLA_FREQ, AS3525_SDSLOT_FREQ) -1) #define AS3525_IDE_FREQ 80000000 #else #define AS3525_IDE_FREQ 50000000 /* The OF uses 66MHz maximal freq */ #endif /* CONFIG_CPU == AS3525v2 */ //#define AS3525_USB_SEL AS3525_CLK_PLLA /* Input Source */ //#define AS3525_USB_DIV /* div = 1/(n=0?1:2n)*/ /* Validity Checks */ /* AS3525_PCLK_FREQ */ #if (CLK_DIV(AS3525_PLLA_FREQ, AS3525_PCLK_FREQ) - 1) >= (1<<4) /* 4 bits */ #error PCLK frequency is too low : clock divider will not fit ! #endif /* AS3525_DBOP_FREQ */ #if (CLK_DIV(AS3525_PCLK_FREQ, AS3525_DBOP_FREQ) - 1) >= (1<<3) /* 3 bits */ #error DBOP frequency is too low : clock divider will not fit ! #endif /* AS3525_IDE_FREQ */ #if (CLK_DIV(AS3525_PLLA_FREQ, AS3525_IDE_FREQ) - 1) >= (1<<4) /* 4 bits */ #error IDE frequency is too low : clock divider will not fit ! #endif /* AS3525_I2C_FREQ */ #if (CLK_DIV(AS3525_PCLK_FREQ, AS3525_I2C_FREQ)) >= (1<<10) /* 2+8 bits */ #error I2C frequency is too low : clock divider will not fit ! #endif /* AS3525_SSP_FREQ */ #if (((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SSP_FREQ)) + 1 ) & ~1) >= (1<<8) /* 8 bits */ #error SSP frequency is too low : clock divider will not fit ! #endif /* AS3525_SD_IDENT_FREQ */ #if ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SD_IDENT_FREQ) / 2) - 1) >= (1<<8) /* 8 bits */ #error SD IDENTIFICATION frequency is too low : clock divider will not fit ! #endif /* I2SIN / I2SOUT frequencies */ /* low samplerate */ #if ((AS3525_MCLK_FREQ/(128*8000))) > 512 /* 8kHz = lowest frequency */ #error AS3525_MCLK_FREQ is too high for 8kHz samplerate ! #endif /* high samplerate */ #if ((AS3525_MCLK_FREQ/(128*96000))) < 1 /* 96kHz = highest frequency */ #error AS3525_MCLK_FREQ is too low for 96kHz samplerate ! #endif #endif /* CLOCK_TARGET_H */