/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (c) 2008 by Michael Sevakis * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include #include "config.h" #include "system.h" #include "thread.h" #include "mc13783.h" #include "adc.h" #include "powermgmt.h" #include "power.h" #include "power-gigabeat-s.h" const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] = { 3659 }; const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] = { 3650 }; /* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */ const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] = { /* Toshiba Gigabeat S Li Ion 700mAH figured from discharge curve */ { 3659, 3719, 3745, 3761, 3785, 3813, 3856, 3926, 3984, 4040, 4121 }, }; /* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */ const unsigned short percent_to_volt_charge[11] = { /* Toshiba Gigabeat S Li Ion 700mAH figured from charge curve */ 4028, 4063, 4087, 4111, 4135, 4156, 4173, 4185, 4194, 4202, 4208 }; /* Returns battery voltage from ADC [millivolts] */ unsigned int battery_adc_voltage(void) { /* ADC reading 0-1023 = 2400mV-4700mV */ return ((adc_read(ADC_BATTERY) * 2303) >> 10) + 2400; } /* Returns the application supply voltage from ADC [millvolts] */ unsigned int application_supply_adc_voltage(void) { return ((adc_read(ADC_APPLICATION_SUPPLY) * 2303) >> 10) + 2400; } unsigned int chrgraw_adc_voltage(void) { return (adc_read(ADC_CHARGER_VOLTAGE) * 23023) >> 10; } /* Returns battery charge current from ADC [milliamps] */ int battery_adc_charge_current(void) { /* Positive reading = charger to battery * Negative reading = battery to charger terminal * ADC reading -512-511 = -2875mA-2875mA */ unsigned int value = adc_read(ADC_CHARGER_CURRENT); int I; if (value == ADC_READ_ERROR) return INT_MIN; I = ((((int32_t)value << 22) >> 22) * 2881) >> 9; return ILEVEL_ADJUST_IN(I); } /* Estimate power dissipation in the charge path regulator in mW. */ unsigned int cccv_regulator_dissipation(void) { /* BATTISNS is shorted to BATT so we don't need to use the * battery current reading. */ int chrgraw = (adc_read(ADC_CHARGER_VOLTAGE) * 230225) >> 10; int batt = ((adc_read(ADC_BATTERY) * 23023) >> 10) + 24000; int ichrgsn = adc_read(ADC_CHARGER_CURRENT); ichrgsn = ((((int32_t)ichrgsn << 22) >> 22) * 2881) >> 9; ichrgsn = abs(ichrgsn); return (chrgraw - ichrgsn - batt)*ILEVEL_ADJUST_IN(ichrgsn) / 10000; } /* Returns battery temperature from ADC [deg-C] */ int battery_adc_temp(void) { /* E[volts] = value * 2.3V / 1023 * R[ohms] = E/I = E[volts] / 0.00002[A] (Thermistor bias current source) * * Steinhart-Hart thermistor equation: * [A + B*ln(R) + D*ln^3(R)] = 1 / T[°K] * * Coeffients that fit experimental data (one thermistor so far, one run): * A = 0.0013002631685462800 * B = 0.0002000841932612330 * D = 0.0000000640446750919 */ static const unsigned short ntc_table[] = { #if 0 /* These have degree deltas > 1 (except the final two) so leave them * out. 70 deg C upper limit is quite sufficient. */ 0, /* INF */ 1, /* 171 */ 2, /* 145 */ 3, /* 130 */ 4, /* 121 */ 5, /* 114 */ 6, /* 108 */ 7, /* 104 */ 8, /* 100 */ 9, /* 96 */ 10, /* 93 */ 11, /* 91 */ 12, /* 88 */ 13, /* 86 */ 14, /* 84 */ 15, /* 82 */ 16, /* 81 */ 17, /* 79 */ 18, /* 78 */ 19, /* 76 */ 20, /* 75 */ 21, /* 74 */ 22, /* 72 */ 23, /* 71 */ #endif 24, /* 70 */ 25, /* 69 */ 26, /* 68 */ 27, /* 67 */ 28, /* 66 */ 30, /* 65 */ 31, /* 64 */ 32, /* 63 */ 33, /* 62 */ 35, /* 61 */ 36, /* 60 */ 38, /* 59 */ 39, /* 58 */ 41, /* 57 */ 43, /* 56 */ 45, /* 55 */ 47, /* 54 */ 49, /* 53 */ 51, /* 52 */ 53, /* 51 */ 56, /* 50 */ 58, /* 49 */ 61, /* 48 */ 63, /* 47 */ 66, /* 46 */ 69, /* 45 */ 73, /* 44 */ 76, /* 43 */ 80, /* 42 */ 83, /* 41 */ 87, /* 40 */ 92, /* 39 */ 96, /* 38 */ 101, /* 37 */ 106, /* 36 */ 111, /* 35 */ 116, /* 34 */ 122, /* 33 */ 128, /* 32 */ 135, /* 31 */ 142, /* 30 */ 149, /* 29 */ 156, /* 28 */ 164, /* 27 */ 173, /* 26 */ 182, /* 25 */ 192, /* 24 */ 202, /* 23 */ 212, /* 22 */ 224, /* 21 */ 236, /* 20 */ 249, /* 19 */ 262, /* 18 */ 277, /* 17 */ 292, /* 16 */ 308, /* 15 */ 325, /* 14 */ 344, /* 13 */ 363, /* 12 */ 384, /* 11 */ 406, /* 10 */ 429, /* 9 */ 454, /* 8 */ 480, /* 7 */ 509, /* 6 */ 539, /* 5 */ 571, /* 4 */ 605, /* 3 */ 641, /* 2 */ 680, /* 1 */ 722, /* 0 */ 766, /* -1 */ 813, /* -2 */ 864, /* -3 */ 918, /* -4 */ 976, /* -5 */ }; unsigned int value = adc_read(ADC_BATTERY_TEMP); if (value > 0) { unsigned i; for (i = 1; i < ARRAYLEN(ntc_table); i++) { if (ntc_table[i] > value) break; } return 71 - i; } return INT_MIN; } /** Charger control **/ /* All code has a preference for the main charger being connected over * USB. USB is considered in the algorithm only if it is the sole source. */ static uint32_t int_sense0 = 0; /* Interrupt Sense 0 bits */ static unsigned int last_inputs = POWER_INPUT_NONE; /* Detect input changes */ static int charger_total_timer = 0; /* Total allowed charging time */ static int icharger_ave = 0; /* Filtered charging current */ static bool charger_close = false; /* Shutdown notification */ static bool service_wdt = true; /* Service the watchdog timer, if things go very wrong, cease and shut down. */ static uint32_t charger_setting = 0; /* Current ICHRG and VCHRG regulator * setting (register bits) */ #define CHARGER_ADJUST ((uint32_t)-1)/* Force change in regulator setting */ static int autorecharge_counter = 0 ; /* Battery < threshold debounce */ static int chgcurr_timer = 0; /* Countdown to CHGCURR error */ #define AUTORECHARGE_COUNTDOWN (10*2) /* 10s debounce */ #define WATCHDOG_TIMEOUT (10*2) /* If not serviced, poweroff in 10s */ #define CHGCURR_TIMEOUT (4*2) /* 4s debounce */ /* Temperature monitoring */ static enum { TEMP_STATE_NORMAL = 0, /* Within range */ TEMP_STATE_WAIT = 1, /* Went out of range, wait to come back */ TEMP_LOW_LIMIT = 0, /* Min temp */ TEMP_HIGH_LIMIT = 1, /* Max temp */ } temp_state = TEMP_STATE_NORMAL; /* Set power thread priority for charging mode or not */ static inline void charging_set_thread_priority(bool charging) { #ifdef HAVE_PRIORITY_SCHEDULING thread_set_priority(THREAD_ID_CURRENT, charging ? PRIORITY_REALTIME : PRIORITY_SYSTEM); #endif (void)charging; } /* Update filtered charger current - exponential moving average */ static bool charger_current_filter_step(void) { int value = battery_adc_charge_current(); if (value == ADC_READ_ERROR) return false; icharger_ave += value - (icharger_ave / ICHARGER_AVE_SAMPLES); return true; } /* Return true if the main charger is connected. */ static bool main_charger_connected(void) { return (last_inputs & POWER_INPUT_MAIN_CHARGER & POWER_INPUT_CHARGER) != 0; } /* Return the voltage level which should automatically trigger * another recharge cycle based upon which power source is available. * Assumes at least one is. */ static unsigned int auto_recharge_voltage(void) { if (main_charger_connected()) return BATT_VAUTO_RECHARGE; else return BATT_USB_VAUTO_RECHARGE; } /* Return greater of supply (BP) or filtered battery voltage. */ unsigned int input_millivolts(void) { unsigned int app_millivolts = application_supply_adc_voltage(); unsigned int bat_millivolts = battery_voltage(); return MAX(app_millivolts, bat_millivolts); } /* Get smoothed readings for initializing filtered data. */ static int stat_battery_reading(int type) { int high = INT_MIN, low = INT_MAX; int value = 0; int i; for (i = 0; i < 7; i++) { int reading = ADC_READ_ERROR; sleep(2); /* Get unique readings */ switch (type) { case ADC_BATTERY: reading = battery_adc_voltage(); break; case ADC_CHARGER_CURRENT: reading = battery_adc_charge_current(); break; } if (reading == ADC_READ_ERROR) return INT_MIN; if (reading > high) high = reading; if (reading < low) low = reading; value += reading; } /* Discard extremes */ return (value - high - low) / 5; } /* Update filtered battery voltage instead of waiting for filter * decay. */ static bool update_filtered_battery_voltage(void) { int millivolts = stat_battery_reading(ADC_BATTERY); if (millivolts != INT_MIN) { reset_battery_filter(millivolts); return true; } return false; } /* Sets the charge current limit based upon state. charge_state should be * set before calling. */ static bool adjust_charger_current(void) { static const uint8_t charger_bits[][2] = { [DISCHARGING] = { /* These are actually zeros but reflect this setting */ MC13783_ICHRG_0MA | MC13783_VCHRG_4_050V, MC13783_ICHRG_0MA | MC13783_VCHRG_4_050V, }, /* Main(+USB): Charge slowly from the adapter until voltage is * sufficient for normal charging. * * USB: The truth is that things will probably not make it this far. * Cover the case, just in case the disk isn't used and it is * manageable. */ [TRICKLE] = { BATTERY_ITRICKLE | BATTERY_VCHARGING, BATTERY_ITRICKLE_USB | BATTERY_VCHARGING }, [TOPOFF] = { BATTERY_IFAST | BATTERY_VCHARGING, BATTERY_IFAST_USB | BATTERY_VCHARGING }, [CHARGING] = { BATTERY_IFAST | BATTERY_VCHARGING, BATTERY_IFAST_USB | BATTERY_VCHARGING }, /* Must maintain battery when on USB power only - utterly nasty * but true and something retailos does (it will even end up charging * the battery but not reporting that it is doing so). * Float lower than MAX - could end up slightly discharging after * a full charge but this is safer than maxing it out. */ [CHARGING+1] = { BATTERY_IFLOAT_USB | BATTERY_VFLOAT_USB, BATTERY_IMAINTAIN_USB | BATTERY_VMAINTAIN_USB }, #if 0 /* Slower settings to so that the linear regulator doesn't dissipate * an excessive amount of power when coming out of precharge state. */ [CHARGING+2] = { BATTERY_ISLOW | BATTERY_VCHARGING, BATTERY_ISLOW_USB | BATTEYR_VCHARGING }, #endif }; bool success = false; int usb_select; uint32_t i; usb_select = ((last_inputs & POWER_INPUT) == POWER_INPUT_USB) ? 1 : 0; if (charge_state == DISCHARGING && usb_select == 1) { /* USB-only, DISCHARGING, = maintaining battery */ int select = (last_inputs & POWER_INPUT_CHARGER) ? 0 : 1; charger_setting = charger_bits[CHARGING+1][select]; } else { /* Take very good care not to write garbage. */ int state = charge_state; if (state < DISCHARGING || state > CHARGING) state = DISCHARGING; charger_setting = charger_bits[state][usb_select]; } if (charger_setting != 0) { if ((charger_setting & MC13783_VCHRG) > BATTERY_VCHARGING || (charger_setting & MC13783_ICHRG) > BATTERY_IFAST) { /* Table is corrupted somehow. We shouldn't run at all. * * Explanation: On two occasions, even though this driver monitors * the regulator register settings on each step and * ensures that only valid table indexes are used, * the current and voltage seem to be misregulated, * resulting in excessively high battery voltage that * will trip the battery protection. After careful * review it seems that two possibilities exist: * This code or data got trashed at some point or * there really is a hardware bug of some sort. So * far the cause is unknown. Voltage is also * monitored in the CHARGING case for that reason. * The solution for data or code corruption is to * just panic and refuse to run the device. The * solution for overvoltage due to hardware bug is to * disable the charging. The action taken will reveal * the true cause, thus _who_ is responsible. * "Burning lithium is baaaad", so sayeth The Council * of Seven Ascended Masters. */ charge_state = CHARGE_STATE_DISABLED; service_wdt = false; } else { /* Turn on 5K pulldown. */ i = mc13783_set(MC13783_CHARGER, MC13783_CHRGRAWPDEN); if (i != MC13783_DATA_ERROR) { charging_set_thread_priority(true); /* Turn regulator logically ON. Hardware may still override. */ i = mc13783_write_masked(MC13783_CHARGER, charger_setting, MC13783_ICHRG | MC13783_VCHRG); if (i != MC13783_DATA_ERROR) { int icharger; /* Enable charge current conversion */ adc_enable_channel(ADC_CHARGER_CURRENT, true); /* Charge path regulator turn on takes ~100ms max. */ sleep(HZ/10); icharger = stat_battery_reading(ADC_CHARGER_CURRENT); if (icharger != INT_MIN) { icharger_ave = icharger * ICHARGER_AVE_SAMPLES; if (update_filtered_battery_voltage()) return true; } } } /* Force regulator OFF. */ charge_state = CHARGE_STATE_ERROR; } } /* Turn regulator OFF. */ icharger_ave = 0; i = mc13783_write_masked(MC13783_CHARGER, MC13783_ICHRG_0MA | MC13783_VCHRG_4_050V, MC13783_ICHRG | MC13783_VCHRG | MC13783_CHRGRAWPDEN); if (MC13783_DATA_ERROR == i) { /* Failed. Force poweroff by not servicing the watchdog. */ service_wdt = false; } else if (0 == charger_setting) { /* Here because OFF was requested state */ success = true; } charger_setting = 0; adc_enable_channel(ADC_CHARGER_CURRENT, false); update_filtered_battery_voltage(); charging_set_thread_priority(false); return success; } /* Stop the charger - if USB only then the regulator will not really be * turned off. ERROR or DISABLED will turn it off however. */ static void stop_charger(void) { charger_total_timer = 0; if (charge_state > DISCHARGING) charge_state = DISCHARGING; adjust_charger_current(); } /* Return OK if it is acceptable to start the regulator. */ static bool charging_ok(void) { bool ok = charge_state >= DISCHARGING; /* Not an error condition? */ if (ok) { /* Is the battery even connected? */ ok = (last_inputs & POWER_INPUT_BATTERY) != 0; } if (ok) { /* No tolerance for any over/under temp - wait for it to * come back into safe range. */ static const signed char temp_ranges[2][2] = { /* Temperature range before beginning charging */ { BATTERY_CHARGE_MIN, BATTERY_CHARGE_MAX }, /* Temperature range after out-of-range detected - charging will self-resume */ { BATTERY_CHARGE_RESTART_MIN, BATTERY_CHARGE_RESTART_MAX }, }; int temp = battery_adc_temp(); const signed char *range = temp_ranges[temp_state]; ok = temp >= range[TEMP_LOW_LIMIT] && temp <= range[TEMP_HIGH_LIMIT]; switch (temp_state) { case TEMP_STATE_NORMAL: if (!ok) temp_state = TEMP_STATE_WAIT; break; case TEMP_STATE_WAIT: if (ok) temp_state = TEMP_STATE_NORMAL; break; default: break; } } if (ok) { /* Any events that should stop the regulator? */ /* Overvoltage at CHRGRAW? */ ok = (int_sense0 & MC13783_CHGOVS) == 0; if (ok) { /* CHGCURR sensed? */ ok = (int_sense0 & MC13783_CHGCURRS) != 0; if (!ok) { /* Debounce transient states */ if (chgcurr_timer > 0) { chgcurr_timer--; ok = true; } } else { chgcurr_timer = CHGCURR_TIMEOUT; } } /* Charger may need to be reinserted */ if (!ok) charge_state = CHARGE_STATE_ERROR; } if (charger_setting != 0) { if (ok) { /* Protect against any conceivable overcharge/voltage condition * before hardware protection must intervene. Disable charger * until reboot. */ ok = battery_voltage() < BATT_TOO_HIGH; if (!ok) charge_state = CHARGE_STATE_DISABLED; } if (ok) { /* Watch to not overheat FET (nothing should go over about 1012.7mW). * Trying a higher voltage AC adapter can work (up to 6.90V) but * we'll just reject that. Reducing current for adapters that bring * CHRGRAW to > 4.900V is another possible action. */ ok = cccv_regulator_dissipation() < 1150; if (!ok) charge_state = CHARGE_STATE_ERROR; } if (!ok) { int state = charge_state; if (state > DISCHARGING) state = DISCHARGING; /* Force off for all states including maintaining the battery level * on USB. */ charge_state = CHARGE_STATE_ERROR; stop_charger(); charge_state = state; } } return ok; } void INIT_ATTR powermgmt_init_target(void) { last_inputs = power_thread_inputs; #ifdef IMX31_ALLOW_CHARGING const uint32_t regval_w = MC13783_VCHRG_4_050V | MC13783_ICHRG_0MA | MC13783_ICHRGTR_0MA | MC13783_OVCTRL_6_90V; /* Use watchdog to shut system down if we lose control of the charging * hardware. */ watchdog_init(WATCHDOG_TIMEOUT); mc13783_write(MC13783_CHARGER, regval_w); if (mc13783_read(MC13783_CHARGER) == regval_w) { /* Divide CHRGRAW input by 10 */ mc13783_clear(MC13783_ADC0, MC13783_CHRGRAWDIV); /* Turn off BATTDETB. It's worthless on MESx0V since the battery * isn't removable (nor the thermistor). */ mc13783_clear(MC13783_POWER_CONTROL0, MC13783_BATTDETEN); } else { /* Register has the wrong value - set error condition and disable * since something is wrong. */ charge_state = CHARGE_STATE_DISABLED; stop_charger(); } #else /* Disable charger use */ charge_state = CHARGE_STATE_DISABLED; #endif } /* Returns true if the unit is charging the batteries. */ bool charging_state(void) { switch (charge_state) { case TRICKLE: case TOPOFF: case CHARGING: return true; default: return false; } } /* Filtered battery charge current */ int battery_charge_current(void) { return icharger_ave / ICHARGER_AVE_SAMPLES; } static void charger_plugged(void) { adc_enable_channel(ADC_BATTERY_TEMP, true); autorecharge_counter = -1; } static void charger_unplugged(void) { /* Charger pulled - turn off current sources (though hardware * will have done that anyway). */ if (charge_state > CHARGE_STATE_DISABLED) { /* Reset state and clear any error. If disabled, the charger * will not have been started or will have been stopped already. */ stop_charger(); charge_state = DISCHARGING; } /* Might need to reevaluate these bits in charger_none. */ last_inputs &= ~(POWER_INPUT | POWER_INPUT_CHARGER); temp_state = TEMP_STATE_NORMAL; autorecharge_counter = 0; chgcurr_timer = 0; adc_enable_channel(ADC_BATTERY_TEMP, false); } static void charger_none(void) { unsigned int pwr = power_thread_inputs; if (last_inputs != pwr) { last_inputs = pwr; if (charge_state == CHARGE_STATE_DISABLED) return; if ((pwr & (POWER_INPUT | POWER_INPUT_CHARGER)) == POWER_INPUT_USB) { /* USB connected but not configured. Maintain battery to the * greatest degree possible. It probably won't be enough but the * discharge won't be so severe. */ charger_plugged(); charger_setting = CHARGER_ADJUST; } else { charger_unplugged(); last_inputs = pwr; /* Restore status */ } } else if (charger_setting != 0) { /* Maintaining - keep filter going and check charge state */ int_sense0 = mc13783_read(MC13783_INTERRUPT_SENSE0); if (!charger_current_filter_step()) { /* Failed to read current */ charge_state = CHARGE_STATE_ERROR; } charging_ok(); } } static void charger_control(void) { unsigned int pwr = power_thread_inputs; if (last_inputs != pwr) { unsigned int changed = last_inputs ^ pwr; last_inputs = pwr; if (charger_setting != 0) charger_setting = CHARGER_ADJUST; if (charge_state == DISCHARGING) { if (main_charger_connected()) { /* If main is connected, ignore USB plugs. */ if (changed & POWER_INPUT_MAIN_CHARGER) { /* Main charger plugged - try charge */ autorecharge_counter = -1; } } else if (pwr & POWER_INPUT_USB_CHARGER & POWER_INPUT_CHARGER) { /* USB power only */ if (changed & POWER_INPUT_USB_CHARGER) { /* USB charger plugged - try charge */ autorecharge_counter = -1; } else if (changed & POWER_INPUT_MAIN_CHARGER) { /* Main charger pulled - go to battery maintenence. */ charger_setting = CHARGER_ADJUST; } } } } if (charger_setting != 0 && !charger_current_filter_step()) { /* Failed to read current */ charge_state = CHARGE_STATE_ERROR; } int_sense0 = mc13783_read(MC13783_INTERRUPT_SENSE0); if (!charging_ok()) return; switch (charge_state) { case DISCHARGING: { /* Battery voltage may have dropped and a charge cycle should * start again. Debounced. */ if (autorecharge_counter < 0 && battery_adc_voltage() < BATT_FULL_VOLTAGE) { /* Try starting a cycle now if battery isn't already topped * off to allow user to ensure the battery is full. */ } else if (battery_voltage() > auto_recharge_voltage()) { /* Still above threshold - reset counter */ autorecharge_counter = AUTORECHARGE_COUNTDOWN; break; } else if (autorecharge_counter > 0) { /* Coundown to restart */ autorecharge_counter--; break; } autorecharge_counter = 0; charging_set_thread_priority(true); if (stat_battery_reading(ADC_BATTERY) < BATT_VTRICKLE_CHARGE) { /* Battery is deeply discharged - precharge at lower current. */ charge_state = TRICKLE; } else { /* Ok for fast charge */ charge_state = CHARGING; } charger_setting = CHARGER_ADJUST; charger_total_timer = CHARGER_TOTAL_TIMER*60*2; break; } /* DISCHARGING: */ case TRICKLE: /* Very low - precharge */ { if (battery_voltage() <= BATT_VTRICKLE_CHARGE) break; /* Switch to normal charge mode. */ charge_state = CHARGING; charger_setting = CHARGER_ADJUST; break; } /* TRICKLE: */ case CHARGING: /* Constant-current stage */ case TOPOFF: /* Constant-voltage stage */ { /* Reg. mode is more informative than an operational necessity. */ charge_state = (int_sense0 & MC13783_CCCVS) ? TOPOFF : CHARGING; if (main_charger_connected()) { /* Monitor and stop if current drops below threshold. */ if (battery_charge_current() > BATTERY_ICHARGE_COMPLETE) break; } else { /* Accurate I-level can't be determined since device also * powers through the I sense. This simply stops the reporting * of charging but the regulator remains on. */ if (battery_voltage() <= BATT_USB_VSTOP) break; } stop_charger(); break; } /* CHARGING: TOPOFF: */ default: break; } /* switch */ /* Check if charger timer expired and stop it if so. */ if (charger_total_timer > 0 && --charger_total_timer == 0) { charge_state = CHARGE_STATE_ERROR; stop_charger(); /* Time ran out - error */ } } /* Main charging algorithm - called from powermgmt.c */ void charging_algorithm_step(void) { #ifdef IMX31_ALLOW_CHARGING if (service_wdt) watchdog_service(); #endif /* Switch by input state */ switch (charger_input_state) { case NO_CHARGER: charger_none(); break; case CHARGER_PLUGGED: charger_plugged(); break; case CHARGER: charger_control(); break; case CHARGER_UNPLUGGED: charger_unplugged(); break; } /* switch */ if (charger_close) { if (charge_state != CHARGE_STATE_DISABLED) { /* Disable starts while shutting down */ charge_state = CHARGE_STATE_DISABLED; stop_charger(); } charger_close = false; return; } if (charger_setting != 0) { if ((mc13783_read(MC13783_CHARGER) & (MC13783_ICHRG | MC13783_VCHRG)) != charger_setting) { /* The hardware setting doesn't match. It could have turned the * charger off in a race of plugging/unplugging or the setting * was changed in one of the calls. */ adjust_charger_current(); } } } /* Disable the charger and prepare for poweroff - called off-thread so we * signal the charging thread to prepare to quit. */ void charging_algorithm_close(void) { charger_close = true; /* Power management thread will set it false again */ while (charger_close) sleep(HZ/10); }