/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2011 by Amaury Pouly * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ .text .global start @ int start(uint32_t arg, uint32_t *result_id) start: #if defined(SANSA_FUZEPLUS) /* If volume down key is hold, return so that the OF can boot */ ldr r2, =0x80018610 @ HW_PINCTRL_DIN1 ldr r2, [r2] tst r2, #0x40000000 @ bit 30, active low moveq r0, #0 @ return 0, continue boot bxeq lr /* save registers for the ROM */ stmfd sp!, {r4-r6,lr} /* if the power source was 5v (ie usb), bypass the power button delay */ ldr r2, =0x800440c0 @ HW_POWER_STS ldr r2, [r2] mov r2, r2, lsl#2 mov r2, r2, lsr#26 @ extract PWRUP_SOURCE tst r2, #0x20 @ bit 5: five volts bne boot_rockbox /* otherwise monitor the power button for a short time */ ldr r2, =550000 @ loop count ldr r4, =0 @ number of times PSWITCH was 1 pswitch_monitor_loop: ldr r3, =0x800440c0 @ HW_POWER_STS ldr r3, [r3] mov r3, r3, lsl#10 mov r3, r3, lsr#30 @ extract PSWITCH cmp r3, #1 addeq r4, r3 @ add one if PSWITCH=1 (means power hold) subs r2, #1 bne pswitch_monitor_loop /* power down if power wasn't hold long enough */ ldr r2, =400000 cmp r4, r2 bcc power_down /* jump to section given as argument */ boot_rockbox: str r0, [r1] mov r0, #1 ldmfd sp!, {r4-r6,pc} power_down: ldr r0, =0x80044100 @ HW_POWER_RESET ldr r1, =0x3E770001 @ unlock key + power down str r1, [r0] b power_down #elif defined(CREATIVE_ZENXFI2) /* If select key is hold, return so that the OF can boot */ ldr r2, =0x80018600 @ HW_PINCTRL_DIN0 ldr r2, [r2] tst r2, #0x4000 @ bit 14, active low moveq r0, #0 @ return 0, continue boot bxeq lr str r0, [r1] mov r0, #1 bx lr #elif defined(CREATIVE_ZENXFI3) /* If volume down key is hold, return so that the OF can boot */ ldr r2, =0x80018620 @ HW_PINCTRL_DIN2 ldr r2, [r2] tst r2, #0x80 @ bit 7, active low moveq r0, #0 @ return 0, continue boot bxeq lr str r0, [r1] mov r0, #1 bx lr #else #error No target defined ! #endif