sansapatcher ------------ To compile sansapatcher, you need both the C200 and E200 Rockbox bootloaders. The latest bootloaders can always be found here: http://download.rockbox.org/bootloader/sandisk-sansa/e200/PP5022.mi4 http://download.rockbox.org/bootloader/sandisk-sansa/c200/firmware.mi4 Place both these files in the sansapatcher source directory, and type "make". Building your own bootloaders ----------------------------- If you would like to compile the bootloaders yourself, they are the output of running the "Bootloader" build for the E200 and C200 targets. NOTE: Unless you know what you are doing, it is recommended that you use the official pre-built binary bootloaders linked to above. Bootloaders compiled from current Rockbox SVN are untested and may contain bugs preventing you from starting the device (or worse...). In the Rockbox source directory, do: mkdir build-e200-bootloader cd build-e200-bootloader ../tools/configure [Select E200, then B for bootloader] make This will create PP5022.mi4 which you should copy to the sansapatcher build directory. A similar process for the C200 will create firmware.mi4.