/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2006-2007 Dave Chapman * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include #include #include #include #include #include #include #include #include "sansaio.h" #include "sansapatcher.h" #ifndef RBUTIL #include "bootimg_c200.h" #include "bootimg_e200.h" #endif /* The offset of the MI4 image header in the firmware partition */ #define PPMI_OFFSET 0x80000 #define NVPARAMS_OFFSET 0x780000 #define NVPARAMS_SIZE (0x80000-0x200) int sansa_verbose = 0; /* Windows requires the buffer for disk I/O to be aligned in memory on a multiple of the disk volume size - so we use a single global variable and initialise it with sansa_alloc_buf() in main(). */ unsigned char* sansa_sectorbuf; static off_t filesize(int fd) { struct stat buf; if (fstat(fd,&buf) < 0) { perror("[ERR] Checking filesize of input file"); return -1; } else { return(buf.st_size); } } /* Partition table parsing code taken from Rockbox */ #define MAX_SECTOR_SIZE 2048 #define SECTOR_SIZE 512 static inline int32_t le2int(const unsigned char* buf) { int32_t res = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; return res; } static inline uint32_t le2uint(const unsigned char* buf) { uint32_t res = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; return res; } static inline void int2le(unsigned int val, unsigned char* addr) { addr[0] = val & 0xFF; addr[1] = (val >> 8) & 0xff; addr[2] = (val >> 16) & 0xff; addr[3] = (val >> 24) & 0xff; } #define BYTES2INT32(array,pos)\ ((long)array[pos] | ((long)array[pos+1] << 8 ) |\ ((long)array[pos+2] << 16 ) | ((long)array[pos+3] << 24 )) int sansa_read_partinfo(struct sansa_t* sansa, int silent) { int i; unsigned long count; count = sansa_read(sansa,sansa_sectorbuf, sansa->sector_size); if (count <= 0) { print_error(" Error reading from disk: "); return -1; } if ((sansa_sectorbuf[510] == 0x55) && (sansa_sectorbuf[511] == 0xaa)) { /* parse partitions */ for ( i = 0; i < 4; i++ ) { unsigned char* ptr = sansa_sectorbuf + 0x1be + 16*i; sansa->pinfo[i].type = ptr[4]; sansa->pinfo[i].start = BYTES2INT32(ptr, 8); sansa->pinfo[i].size = BYTES2INT32(ptr, 12); /* extended? */ if ( sansa->pinfo[i].type == 5 ) { /* not handled yet */ } } } else if ((sansa_sectorbuf[0] == 'E') && (sansa_sectorbuf[1] == 'R')) { if (!silent) fprintf(stderr,"[ERR] Bad boot sector signature\n"); return -1; } /* Calculate the starting position of the firmware partition */ sansa->start = (loff_t)sansa->pinfo[1].start*(loff_t)sansa->sector_size; return 0; } /* NOTE: memmem implementation copied from glibc-2.2.4 - it's a GNU extension and is not universally. In addition, early versions of memmem had a serious bug - the meaning of needle and haystack were reversed. */ /* Copyright (C) 1991,92,93,94,96,97,98,2000 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. The GNU C Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with the GNU C Library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ /* Return the first occurrence of NEEDLE in HAYSTACK. */ static void * sansa_memmem (haystack, haystack_len, needle, needle_len) const void *haystack; size_t haystack_len; const void *needle; size_t needle_len; { const char *begin; const char *const last_possible = (const char *) haystack + haystack_len - needle_len; if (needle_len == 0) /* The first occurrence of the empty string is deemed to occur at the beginning of the string. */ return (void *) haystack; /* Sanity check, otherwise the loop might search through the whole memory. */ if (__builtin_expect (haystack_len < needle_len, 0)) return NULL; for (begin = (const char *) haystack; begin <= last_possible; ++begin) if (begin[0] == ((const char *) needle)[0] && !memcmp ((const void *) &begin[1], (const void *) ((const char *) needle + 1), needle_len - 1)) return (void *) begin; return NULL; } /* * CRC32 implementation taken from: * * efone - Distributed internet phone system. * * (c) 1999,2000 Krzysztof Dabrowski * (c) 1999,2000 ElysiuM deeZine * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * */ /* crc_tab[] -- this crcTable is being build by chksum_crc32GenTab(). * so make sure, you call it before using the other * functions! */ static unsigned int crc_tab[256]; /* chksum_crc() -- to a given block, this one calculates the * crc32-checksum until the length is * reached. the crc32-checksum will be * the result. */ static unsigned int chksum_crc32 (const unsigned char *block, unsigned int length) { register unsigned long crc; unsigned long i; crc = 0; for (i = 0; i < length; i++) { crc = ((crc >> 8) & 0x00FFFFFF) ^ crc_tab[(crc ^ *block++) & 0xFF]; } return (crc); } /* chksum_crc32gentab() -- to a global crc_tab[256], this one will * calculate the crcTable for crc32-checksums. * it is generated to the polynom [..] */ static void chksum_crc32gentab (void) { unsigned long crc, poly; int i, j; poly = 0xEDB88320L; for (i = 0; i < 256; i++) { crc = i; for (j = 8; j > 0; j--) { if (crc & 1) { crc = (crc >> 1) ^ poly; } else { crc >>= 1; } } crc_tab[i] = crc; } } /* Known keys for Sansa E200 and C200 firmwares: */ #define NUM_KEYS ((int)(sizeof(keys)/sizeof(keys[0]))) static const uint32_t keys[][4] = { { 0xe494e96e, 0x3ee32966, 0x6f48512b, 0xa93fbb42 }, /* "sansa" */ { 0xd7b10538, 0xc662945b, 0x1b3fce68, 0xf389c0e6 }, /* "sansa_gh" */ { 0x1d29ddc0, 0x2579c2cd, 0xce339e1a, 0x75465dfe }, /* sansa 103 */ { 0x2a7968de, 0x15127979, 0x142e60a7, 0xe49c1893 }, /* c200 1.00.03 */ { 0xbf2d06fa, 0xf0e23d59, 0x29738132, 0xe2d04ca7 }, /* c200 1.00.04 and up*/ { 0xa913d139, 0xf842f398, 0x3e03f1a6, 0x060ee012 }, /* c200 1.01.05 and up*/ { 0x0fe92902, 0xe8cc0f89, 0x6ff568ba, 0x1eff5161 }, /* c200 1.01.07 */ }; /* tea_decrypt() from http://en.wikipedia.org/wiki/Tiny_Encryption_Algorithm "Following is an adaptation of the reference encryption and decryption routines in C, released into the public domain by David Wheeler and Roger Needham:" */ /* NOTE: The mi4 version of TEA uses a different initial value to sum compared to the reference implementation and the main loop is 8 iterations, not 32. */ static void tea_decrypt(uint32_t* v0, uint32_t* v1, const uint32_t* k) { uint32_t sum=0xF1BBCDC8, i; /* set up */ uint32_t delta=0x9E3779B9; /* a key schedule constant */ uint32_t k0=k[0], k1=k[1], k2=k[2], k3=k[3]; /* cache key */ for(i=0; i<8; i++) { /* basic cycle start */ *v1 -= ((*v0<<4) + k2) ^ (*v0 + sum) ^ ((*v0>>5) + k3); *v0 -= ((*v1<<4) + k0) ^ (*v1 + sum) ^ ((*v1>>5) + k1); sum -= delta; /* end cycle */ } } /* mi4 files are encrypted in 64-bit blocks (two little-endian 32-bit integers) and the key is incremented after each block */ static void tea_decrypt_buf(const unsigned char* src, unsigned char* dest, size_t n, const uint32_t * initial_key) { uint32_t v0, v1; unsigned int i; uint32_t key[4]; memcpy(key, initial_key, sizeof(key)); for (i = 0; i < (n / 8); i++) { v0 = le2int(src); v1 = le2int(src+4); tea_decrypt(&v0, &v1, key); int2le(v0, dest); int2le(v1, dest+4); src += 8; dest += 8; /* Now increment the key */ key[0]++; if (key[0]==0) { key[1]++; if (key[1]==0) { key[2]++; if (key[2]==0) { key[3]++; } } } } } static int get_mi4header(const unsigned char* buf,struct mi4header_t* mi4header) { if (memcmp(buf,"PPOS",4)!=0) return -1; mi4header->version = le2int(buf+0x04); mi4header->length = le2int(buf+0x08); mi4header->crc32 = le2int(buf+0x0c); mi4header->enctype = le2int(buf+0x10); mi4header->mi4size = le2int(buf+0x14); mi4header->plaintext = le2int(buf+0x18); return 0; } static int set_mi4header(unsigned char* buf,const struct mi4header_t* mi4header) { if (memcmp(buf,"PPOS",4)!=0) return -1; int2le(mi4header->version ,buf+0x04); int2le(mi4header->length ,buf+0x08); int2le(mi4header->crc32 ,buf+0x0c); int2le(mi4header->enctype ,buf+0x10); int2le(mi4header->mi4size ,buf+0x14); int2le(mi4header->plaintext ,buf+0x18); /* Add a dummy DSA signature */ memset(buf+0x1c,0,40); buf[0x2f] = 1; return 0; } static int sansa_seek_and_read(struct sansa_t* sansa, loff_t pos, unsigned char* buf, int nbytes) { int n; if (sansa_seek(sansa, pos) < 0) { return -1; } if ((n = sansa_read(sansa,buf,nbytes)) < 0) { return -1; } if (n < nbytes) { fprintf(stderr,"[ERR] Short read - requested %d bytes, received %d\n", nbytes,n); return -1; } return 0; } /* We identify an E200 based on the following criteria: 1) Exactly two partitions; 2) First partition is type "W95 FAT32" (0x0b or 0x0c); 3) Second partition is type "OS/2 hidden C: drive" (0x84); 4) The "PPBL" string appears at offset 0 in the 2nd partition; 5) The "PPMI" string appears at offset PPMI_OFFSET in the 2nd partition. */ int is_sansa(struct sansa_t* sansa) { struct mi4header_t mi4header; int ppmi_length; int ppbl_length; /* Check partition layout */ if (((sansa->pinfo[0].type != 0x06) && (sansa->pinfo[0].type != 0x0b) && (sansa->pinfo[0].type != 0x0c) && (sansa->pinfo[0].type != 0x0e)) || (sansa->pinfo[1].type != 0x84) || (sansa->pinfo[2].type != 0x00) || (sansa->pinfo[3].type != 0x00)) { /* Bad partition layout, abort */ return -1; } /* Check Bootloader header */ if (sansa_seek_and_read(sansa, sansa->start, sansa_sectorbuf, 0x200) < 0) { return -2; } if (memcmp(sansa_sectorbuf,"PPBL",4)!=0) { /* No bootloader header, abort */ return -4; } ppbl_length = (le2int(sansa_sectorbuf+4) + 0x1ff) & ~0x1ff; /* Sanity/safety check - the bootloader can't be larger than PPMI_OFFSET */ if (ppbl_length > PPMI_OFFSET) { return -5; } /* Load Sansa bootloader and check for "Sansa C200" magic string */ if (sansa_seek_and_read(sansa, sansa->start + 0x200, sansa_sectorbuf, ppbl_length) < 0) { fprintf(stderr,"[ERR] Seek and read to 0x%08llx in is_sansa failed.\n", sansa->start+0x200); return -6; } if (sansa_memmem(sansa_sectorbuf, ppbl_length, "Sansa C200", 10) != NULL) { /* C200 */ sansa->targetname="c200"; } else { /* E200 */ sansa->targetname="e200"; } /* Check Main firmware header */ if (sansa_seek_and_read(sansa, sansa->start+PPMI_OFFSET, sansa_sectorbuf, 0x200) < 0) { fprintf(stderr,"[ERR] Seek to 0x%08llx in is_sansa failed.\n", sansa->start+PPMI_OFFSET); return -5; } if (memcmp(sansa_sectorbuf,"PPMI",4)!=0) { /* No bootloader header, abort */ return -7; } ppmi_length = le2int(sansa_sectorbuf+4); /* Check main mi4 file header */ if (sansa_seek_and_read(sansa, sansa->start+PPMI_OFFSET+0x200, sansa_sectorbuf, 0x200) < 0) { fprintf(stderr,"[ERR] Seek to 0x%08llx in is_sansa failed.\n", sansa->start+PPMI_OFFSET+0x200); return -5; } if (get_mi4header(sansa_sectorbuf,&mi4header) < 0) { fprintf(stderr,"[ERR] Invalid mi4header\n"); return -6; } /* Some sanity checks: 1) Main MI4 image without RBBL and < 100000 bytes -> old install 2) Main MI4 image with RBBL but no second image -> old install */ sansa->hasoldbootloader = 0; if (memcmp(sansa_sectorbuf+0x1f8,"RBBL",4)==0) { /* Look for an original firmware after the first image */ if (sansa_seek_and_read(sansa, sansa->start + PPMI_OFFSET + 0x200 + ppmi_length, sansa_sectorbuf, 512) < 0) { return -7; } if (get_mi4header(sansa_sectorbuf,&mi4header)!=0) { fprintf(stderr,"[ERR] No original firmware found\n"); sansa->hasoldbootloader = 1; } } else if (mi4header.mi4size < 100000) { fprintf(stderr,"[ERR] Old bootloader found\n"); sansa->hasoldbootloader = 1; } return 0; } int sansa_scan(struct sansa_t* sansa) { int i; int n = 0; char last_disk[4096]; int denied = 0; int result; printf("[INFO] Scanning disk devices...\n"); for (i = 0; i <= 25 ; i++) { #ifdef __WIN32__ sprintf(sansa->diskname,"\\\\.\\PhysicalDrive%d",i); #elif defined(linux) || defined (__linux) sprintf(sansa->diskname,"/dev/sd%c",'a'+i); #elif defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) \ || defined(__bsdi__) || defined(__DragonFly__) sprintf(sansa->diskname,"/dev/da%d",i); #elif defined(__APPLE__) && defined(__MACH__) sprintf(sansa->diskname,"/dev/disk%d",i); #else #error No disk paths defined for this platform #endif if ((result = sansa_open(sansa, 1)) < 0) { if(result == -2) { denied++; } sansa_close(sansa); continue; } if (sansa_read_partinfo(sansa,1) < 0) { sansa_close(sansa); continue; } if (is_sansa(sansa) < 0) { sansa_close(sansa); continue; } #ifdef __WIN32__ printf("[INFO] %s found - disk device %d\n",sansa->targetname, i); #else printf("[INFO] %s found - %s\n",sansa->targetname, sansa->diskname); #endif n++; strcpy(last_disk,sansa->diskname); sansa_close(sansa); } if (n==1) { /* Remember the disk name */ strcpy(sansa->diskname,last_disk); } else if (n == 0 && denied) { printf("[ERR] FATAL: Permission denied on %d device(s) and no sansa detected.\n", denied); #ifdef __WIN32__ printf("[ERR] You need to run this program with administrator priviledges!\n"); #else printf("[ERR] You need permissions for raw disc access for this program to work!\n"); #endif } return (n == 0 && denied) ? -1 : n; } /* Prepare original firmware for writing to the firmware partition by decrypting and updating the header */ static int prepare_original_firmware(struct sansa_t* sansa, unsigned char* buf, struct mi4header_t* mi4header) { unsigned char* tmpbuf; int i; int key_found; get_mi4header(buf,mi4header); #if 0 printf("mi4header->version =0x%08x\n",mi4header->version); printf("mi4header->length =0x%08x\n",mi4header->length); printf("mi4header->crc32 =0x%08x\n",mi4header->crc32); printf("mi4header->enctype =0x%08x\n",mi4header->enctype); printf("mi4header->mi4size =0x%08x\n",mi4header->mi4size); printf("mi4header->plaintext =0x%08x\n",mi4header->plaintext); #endif /* Decrypt anything that needs decrypting. */ if (mi4header->plaintext < mi4header->mi4size - 0x200) { /* TODO: Check different keys */ tmpbuf=malloc(mi4header->mi4size-(mi4header->plaintext+0x200)); if (tmpbuf==NULL) { fprintf(stderr,"[ERR] Can not allocate memory\n"); return -1; } key_found=0; for (i=0; i < NUM_KEYS && !key_found ; i++) { tea_decrypt_buf(buf+(mi4header->plaintext+0x200), tmpbuf, mi4header->mi4size-(mi4header->plaintext+0x200), keys[i]); key_found = (le2uint(tmpbuf+mi4header->length-mi4header->plaintext-4) == 0xaa55aa55); } if (key_found) { memcpy(buf+(mi4header->plaintext+0x200),tmpbuf,mi4header->mi4size-(mi4header->plaintext+0x200)); free(tmpbuf); } else { fprintf(stderr,"[ERR] Failed to decrypt image, aborting\n"); free(tmpbuf); return -1; } } /* Increase plaintext value to full file */ mi4header->plaintext = mi4header->mi4size - 0x200; /* Update CRC checksum */ chksum_crc32gentab (); mi4header->crc32 = chksum_crc32(buf+0x200,mi4header->mi4size-0x200); set_mi4header(buf,mi4header); /* Add Rockbox-specific header */ memcpy(buf+0x1f8,"RBOF",4); memcpy(buf+0x1fc,sansa->targetname,4); return 0; } static int load_original_firmware(struct sansa_t* sansa, unsigned char* buf, struct mi4header_t* mi4header) { int ppmi_length; int n; /* Read 512 bytes from PPMI_OFFSET - the PPMI header plus the mi4 header */ if (sansa_seek_and_read(sansa, sansa->start + PPMI_OFFSET, buf, 512) < 0) { return -1; } /* No need to check PPMI magic - it's done during init to confirm this is an E200 */ ppmi_length = le2int(buf+4); /* Firstly look for an original firmware after the first image */ if (sansa_seek_and_read(sansa, sansa->start + PPMI_OFFSET + 0x200 + ppmi_length, buf, 512) < 0) { return -1; } if (get_mi4header(buf,mi4header)==0) { /* We have a valid MI4 file after a bootloader, so we use this. */ if ((n = sansa_seek_and_read(sansa, sansa->start + PPMI_OFFSET + 0x200 + ppmi_length, buf, mi4header->mi4size)) < 0) { return -1; } } else { /* No valid MI4 file, so read the first image. */ if ((n = sansa_seek_and_read(sansa, sansa->start + PPMI_OFFSET + 0x200, buf, ppmi_length)) < 0) { return -1; } } return prepare_original_firmware(sansa, buf, mi4header); } int sansa_read_firmware(struct sansa_t* sansa, const char* filename) { int res; int outfile; struct mi4header_t mi4header; res = load_original_firmware(sansa,sansa_sectorbuf,&mi4header); if (res < 0) return res; outfile = open(filename,O_CREAT|O_TRUNC|O_WRONLY|O_BINARY,0666); if (outfile < 0) { fprintf(stderr,"[ERR] Couldn't open file %s\n",filename); return -1; } res = write(outfile,sansa_sectorbuf,mi4header.mi4size); if (res != (int)mi4header.mi4size) { fprintf(stderr,"[ERR] Write error - %d\n", res); return -1; } close(outfile); return 0; } int sansa_add_bootloader(struct sansa_t* sansa, const char* filename, int type) { int res; int infile = -1; /* Prevent an erroneous "may be used uninitialised" gcc warning */ int bl_length = 0; /* Keep gcc happy when building for rbutil */ struct mi4header_t mi4header; int n; int length; if (type==FILETYPE_MI4) { /* Step 1 - read bootloader into RAM. */ infile=open(filename,O_RDONLY|O_BINARY); if (infile < 0) { fprintf(stderr,"[ERR] Couldn't open input file %s\n",filename); return -1; } bl_length = filesize(infile); } else { #ifndef RBUTIL if (strcmp(sansa->targetname,"c200") == 0) { bl_length = LEN_bootimg_c200; } else { bl_length = LEN_bootimg_e200; } #endif } /* Create PPMI header */ memset(sansa_sectorbuf,0,0x200); memcpy(sansa_sectorbuf,"PPMI",4); int2le(bl_length, sansa_sectorbuf+4); int2le(0x00020000, sansa_sectorbuf+8); if (type==FILETYPE_MI4) { /* Read bootloader into sansa_sectorbuf+0x200 */ n = read(infile,sansa_sectorbuf+0x200,bl_length); close(infile); if (n < bl_length) { fprintf(stderr,"[ERR] Short read - requested %d bytes, received %d\n" ,bl_length,n); return -1; } if (memcmp(sansa_sectorbuf+0x200+0x1f8,"RBBL",4)!=0) { fprintf(stderr,"[ERR] %s is not a Rockbox bootloader, aborting.\n", filename); return -1; } } else { #ifndef RBUTIL if (strcmp(sansa->targetname,"c200") == 0) { memcpy(sansa_sectorbuf+0x200,bootimg_c200,LEN_bootimg_c200); } else { memcpy(sansa_sectorbuf+0x200,bootimg_e200,LEN_bootimg_e200); } #endif } /* Load original firmware from Sansa to the space after the bootloader */ res = load_original_firmware(sansa,sansa_sectorbuf+0x200+bl_length,&mi4header); if (res < 0) return res; /* Now write the whole thing back to the Sansa */ if (sansa_seek(sansa, sansa->start+PPMI_OFFSET) < 0) { fprintf(stderr,"[ERR] Seek to 0x%08llx in add_bootloader failed.\n", sansa->start+PPMI_OFFSET); return -5; } length = 0x200 + bl_length + mi4header.mi4size; n=sansa_write(sansa, sansa_sectorbuf, length); if (n < length) { fprintf(stderr,"[ERR] Short write in add_bootloader\n"); return -6; } return 0; } int sansa_delete_bootloader(struct sansa_t* sansa) { int res; struct mi4header_t mi4header; int n; int length; /* Load original firmware from Sansa to sansa_sectorbuf+0x200 */ res = load_original_firmware(sansa,sansa_sectorbuf+0x200,&mi4header); if (res < 0) return res; /* Create PPMI header */ memset(sansa_sectorbuf,0,0x200); memcpy(sansa_sectorbuf,"PPMI",4); int2le(mi4header.mi4size, sansa_sectorbuf+4); int2le(0x00020000, sansa_sectorbuf+8); /* Now write the whole thing back to the Sansa */ if (sansa_seek(sansa, sansa->start+PPMI_OFFSET) < 0) { fprintf(stderr,"[ERR] Seek to 0x%08llx in add_bootloader failed.\n", sansa->start+PPMI_OFFSET); return -5; } length = 0x200 + mi4header.mi4size; n=sansa_write(sansa, sansa_sectorbuf, length); if (n < length) { fprintf(stderr,"[ERR] Short write in delete_bootloader\n"); return -6; } return 0; } /** List number of MI4 images on the player, return number. */ int sansa_list_images(struct sansa_t* sansa) { struct mi4header_t mi4header; loff_t ppmi_length; int num = 0; /* Check Main firmware header */ if (sansa_seek_and_read(sansa, sansa->start+PPMI_OFFSET, sansa_sectorbuf, 0x200) < 0) { return 0; } ppmi_length = le2int(sansa_sectorbuf+4); printf("[INFO] Image 1 - %llu bytes\n",ppmi_length); num = 1; /* Look for an original firmware after the first image */ if (sansa_seek_and_read(sansa, sansa->start + PPMI_OFFSET + 0x200 + ppmi_length, sansa_sectorbuf, 512) < 0) { return 0; } if (get_mi4header(sansa_sectorbuf,&mi4header)==0) { printf("[INFO] Image 2 - %d bytes\n",mi4header.mi4size); num = 2; } return num; } int sansa_update_of(struct sansa_t* sansa, const char* filename) { int n; int infile = -1; /* Prevent an erroneous "may be used uninitialised" gcc warning */ int of_length = 0; /* Keep gcc happy when building for rbutil */ int ppmi_length; struct mi4header_t mi4header; unsigned char buf[512]; /* Step 1 - check we have an OF on the Sansa to upgrade. We expect the Rockbox bootloader to be installed and the OF to be after it on disk. */ /* Read 512 bytes from PPMI_OFFSET - the PPMI header */ if (sansa_seek_and_read(sansa, sansa->start + PPMI_OFFSET, buf, 512) < 0) { return -1; } /* No need to check PPMI magic - it's done during init to confirm this is an E200 */ ppmi_length = le2int(buf+4); /* Look for an original firmware after the first image */ if (sansa_seek_and_read(sansa, sansa->start+PPMI_OFFSET+0x200+ppmi_length, buf, 512) < 0) { return -1; } if (get_mi4header(buf,&mi4header)!=0) { /* We don't have a valid MI4 file after a bootloader, so do nothing. */ fprintf(stderr,"[ERR] No original firmware found at 0x%08llx\n", sansa->start+PPMI_OFFSET+0x200+ppmi_length); return -1; } /* Step 2 - read OF into RAM. */ infile=open(filename,O_RDONLY|O_BINARY); if (infile < 0) { fprintf(stderr,"[ERR] Couldn't open input file %s\n",filename); return -1; } of_length = filesize(infile); /* Load original firmware from file */ memset(sansa_sectorbuf,0,0x200); n = read(infile,sansa_sectorbuf,of_length); close(infile); if (n < of_length) { fprintf(stderr,"[ERR] Short read - requested %d bytes, received %d\n" , of_length, n); return -1; } /* Check we have a valid MI4 file. */ if (get_mi4header(sansa_sectorbuf,&mi4header)!=0) { fprintf(stderr,"[ERR] %s is not a valid mi4 file\n",filename); return -1; } /* Decrypt and build the header */ if(prepare_original_firmware(sansa, sansa_sectorbuf, &mi4header)!=0){ fprintf(stderr,"[ERR] Unable to build decrypted mi4 from %s\n" ,filename); return -1; } /* Step 3 - write the OF to the Sansa */ if (sansa_seek(sansa, sansa->start+PPMI_OFFSET+0x200+ppmi_length) < 0) { fprintf(stderr,"[ERR] Seek to 0x%08llx in sansa_update_of failed.\n", sansa->start+PPMI_OFFSET+0x200+ppmi_length); return -1; } n=sansa_write(sansa, sansa_sectorbuf, of_length); if (n < of_length) { fprintf(stderr,"[ERR] Short write in sansa_update_of\n"); return -1; } /* Step 4 - zero out the nvparams section - we have to do this or we end up with multiple copies of the nvparams data and don't know which one to work with for the database rebuild disabling trick in our bootloader */ if (strcmp(sansa->targetname,"e200") == 0) { printf("[INFO] Resetting Original Firmware settings\n"); if (sansa_seek(sansa, sansa->start+NVPARAMS_OFFSET+0x200) < 0) { fprintf(stderr,"[ERR] Seek to 0x%08llx in sansa_update_of failed.\n", sansa->start+NVPARAMS_OFFSET+0x200); return -1; } memset(sansa_sectorbuf,0,NVPARAMS_SIZE); n=sansa_write(sansa, sansa_sectorbuf, NVPARAMS_SIZE); if (n < NVPARAMS_SIZE) { fprintf(stderr,"[ERR] Short write in sansa_update_of\n"); return -1; } } return 0; } /* Update the PPBL (bootloader) image in the hidden firmware partition */ int sansa_update_ppbl(struct sansa_t* sansa, const char* filename) { int n; int infile = -1; /* Prevent an erroneous "may be used uninitialised" gcc warning */ int ppbl_length = 0; /* Keep gcc happy when building for rbutil */ /* Step 1 - read bootloader into RAM. */ infile=open(filename,O_RDONLY|O_BINARY); if (infile < 0) { fprintf(stderr,"[ERR] Couldn't open input file %s\n",filename); return -1; } ppbl_length = filesize(infile); n = read(infile,sansa_sectorbuf+0x200,ppbl_length); close(infile); if (n < ppbl_length) { fprintf(stderr,"[ERR] Short read - requested %d bytes, received %d\n", ppbl_length, n); return -1; } /* Step 2 - Build the header */ memset(sansa_sectorbuf,0,0x200); memcpy(sansa_sectorbuf,"PPBL",4); int2le(ppbl_length, sansa_sectorbuf+4); int2le(0x00010000, sansa_sectorbuf+8); /* Step 3 - write the bootloader to the Sansa */ if (sansa_seek(sansa, sansa->start) < 0) { fprintf(stderr,"[ERR] Seek to 0x%08llx in sansa_update_ppbl failed.\n", sansa->start); return -1; } n=sansa_write(sansa, sansa_sectorbuf, ppbl_length + 0x200); if (n < (ppbl_length+0x200)) { fprintf(stderr,"[ERR] Short write in sansa_update_ppbl\n"); return -1; } return 0; }