summaryrefslogtreecommitdiffstats
path: root/firmware/drivers/audio/uda1380.c
blob: 079175d966c04bd75e2dc53fe0cdc7050011e5f6 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 * $Id$
 *
 * Copyright (C) 2005 by Andy Young
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/
#include <string.h>

#include "config.h"
#include "logf.h"
#include "system.h"
#include "kernel.h"
#include "audio.h"
#include "debug.h"
#include "udacodec.h"

#include "audiohw.h"

/*  The UDA1380 requires a clock signal at a multiple of the sample rate
    (256Fs, 384Fs, 512Fs or 768Fs, where Fs = sample rate).
    Some targets are able to supply this clock directly to the SYSCLK input.
    The H100 and H300 coldfire targets are limited in the selection of
    frequencies for this clock signal so they use a PLL inside the UDA1380
    (called the WSPLL) to regenerate it from the LRCK signal off the IIS bus.
*/
#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
#define USE_WSPLL
#endif

/* convert tenth of dB volume (-840..0) to master volume register value */
static int vol_tenthdb2hw(int db)
{
    if (db < -720)                  /* 1.5 dB steps */
        return (2940 - db) / 15;
    else if (db < -660)             /* 0.75 dB steps */
        return (1110 - db) * 2 / 15;
    else if (db < -520)             /* 0.5 dB steps */
        return (520 - db) / 5;
    else                            /* 0.25 dB steps */
        return -db * 2 / 5;
}

/* convert tenth of dB volume (-780..0) to mixer volume register value */
static int mixer_tenthdb2hw(int db)
{
    if (db < -660)                 /* 1.5 dB steps */
        return (2640 - db) / 15;
    else if (db < -600)            /* 0.75 dB steps */
        return (990 - db) * 2 / 15;
    else if (db < -460)            /* 0.5 dB steps */
        return (460 - db) / 5; 
    else                           /* 0.25 dB steps */
        return -db * 2 / 5;
}

/* ------------------------------------------------- */
/* Local functions and variables */
/* ------------------------------------------------- */

static int uda1380_write_reg(unsigned char reg, unsigned short value);
static unsigned short uda1380_regs[0x30];
static short recgain_mic;
static short recgain_line;

#ifdef USE_WSPLL

/* Internal control of WSPLL */
static bool wspll_enable = false;

static void wspll_on(bool on)
{
    uda1380_regs[REG_0] &= ~(ADC_CLK | DAC_CLK);
    uda1380_regs[REG_PWR] &= ~PON_PLL;

    unsigned short pll_ena = (on) ? (ADC_CLK | DAC_CLK) : 0;
    unsigned short pll_pow = (on) ? PON_PLL : 0;

    uda1380_write_reg(REG_0, uda1380_regs[REG_0] | pll_ena);
    uda1380_write_reg(REG_PWR, uda1380_regs[REG_PWR] | pll_pow);

    wspll_enable = on;
}
#endif

/* Definition of a playback configuration to start with */

#define NUM_DEFAULT_REGS 13
static const unsigned short uda1380_defaults[2*NUM_DEFAULT_REGS] =
{
   REG_0,          EN_DAC | EN_INT | EN_DEC | WSPLL_25_50 | SYSCLK_256FS,
   REG_I2S,        I2S_IFMT_IIS,
   REG_PWR,        PON_BIAS,
                   /* PON_HP & PON_DAC is enabled later */
   REG_AMIX,       AMIX_RIGHT(0x3f) | AMIX_LEFT(0x3f),
                   /* 00=max, 3f=mute */
   REG_MASTER_VOL, MASTER_VOL_LEFT(0x20) | MASTER_VOL_RIGHT(0x20),
                   /* 00=max, ff=mute */
   REG_MIX_VOL,    MIX_VOL_CH_1(0) | MIX_VOL_CH_2(0xff),
                   /* 00=max, ff=mute */
   REG_EQ,         EQ_MODE_MAX,
                   /* Bass and treble = 0 dB */
   REG_MUTE,       MUTE_MASTER | MUTE_CH2,
                   /* Mute everything to start with */
   REG_MIX_CTL,    MIX_CTL_MIX | OVERSAMPLE_MODE(3),
                   /* Enable mixer and 4x oversampling */
   REG_DEC_VOL,    0,
   REG_PGA,        MUTE_ADC,
   REG_ADC,        SKIP_DCFIL,
   REG_AGC,        0
};


/* Returns 0 if register was written or -1 if write failed */
static int uda1380_write_reg(unsigned char reg, unsigned short value)
{
    if (udacodec_write(reg, value) < 0)
    {
        DEBUGF("uda1380 error reg=0x%x", reg);
        return -1;
    } 

    uda1380_regs[reg] = value;

    return 0;
}

/**
 * Sets left and right master volume  (0(max) to 252(muted))
 */
void audiohw_set_volume(int vol_l, int vol_r)
{
    vol_l = vol_tenthdb2hw(vol_l);
    vol_r = vol_tenthdb2hw(vol_r);
    uda1380_write_reg(REG_MASTER_VOL,
                      MASTER_VOL_LEFT(vol_l) | MASTER_VOL_RIGHT(vol_r));
}

/**
 * Sets the bass value (0-12)
 */
void audiohw_set_bass(int value)
{
    uda1380_write_reg(REG_EQ, (uda1380_regs[REG_EQ] & ~BASS_MASK)
                              | BASSL(value) | BASSR(value));
}

/**
 * Sets the treble value (0-3)
 */
void audiohw_set_treble(int value)
{
    uda1380_write_reg(REG_EQ, (uda1380_regs[REG_EQ] & ~TREBLE_MASK)
                              | TREBLEL(value) | TREBLER(value));
}

static void audiohw_mute(bool mute)
{
    unsigned int value = uda1380_regs[REG_MUTE];

    if (mute)
        value = value | MUTE_MASTER;
    else
        value = value & ~MUTE_MASTER;

    uda1380_write_reg(REG_MUTE, value);
}

/* Returns 0 if successful or -1 if some register failed */
static int audiohw_set_regs(void)
{
    int i;
    memset(uda1380_regs, 0, sizeof(uda1380_regs));

    /* Initialize all registers */
    for (i=0; i<NUM_DEFAULT_REGS; i++)
    {
        unsigned char reg = uda1380_defaults[i*2+0];
        unsigned short value = uda1380_defaults[i*2+1];

        if (uda1380_write_reg(reg, value) == -1)
            return -1;
    }

    return 0;
}

/**
 * Sets frequency settings for DAC and ADC relative to MCLK
 *
 * Selection for frequency ranges:
 *  Fs:        range:       with:
 *  11025: 0 = 6.25 to 12.5 MCLK/2 SCLK, LRCK: Audio Clk / 16
 *  22050: 1 = 12.5 to 25   MCLK/2 SCLK, LRCK: Audio Clk / 8
 *  44100: 2 = 25   to 50   MCLK   SCLK, LRCK: Audio Clk / 4 (default)
 *  88200: 3 = 50   to 100  MCLK   SCLK, LRCK: Audio Clk / 2
 */
void audiohw_set_frequency(int fsel)
{
    static const unsigned short values_reg[HW_NUM_FREQ][2] =
    {
        [HW_FREQ_11] =                    /* Fs:   */
        {
            0,
            WSPLL_625_125 | SYSCLK_512FS
        },
        [HW_FREQ_22] =
        {
            0,
            WSPLL_125_25 | SYSCLK_256FS
        },
        [HW_FREQ_44] =
        {
            MIX_CTL_SEL_NS,
            WSPLL_25_50 | SYSCLK_256FS
        },
        HW_HAVE_88_([HW_FREQ_88] =
        {
            MIX_CTL_SEL_NS,
            WSPLL_50_100 | SYSCLK_256FS
        },)
    };

    const unsigned short *ent;

    if ((unsigned)fsel >= HW_NUM_FREQ)
        fsel = HW_FREQ_DEFAULT;

    ent = values_reg[fsel];

#ifdef USE_WSPLL
    /* Enable WSPLL if needed (for Iriver H100 and H300 series) */
HW_HAVE_88_(
    if (fsel == HW_FREQ_88)
    {
      /* Only at this case we need use WSPLL on DAC part for Iriver H100 and H300 series, because Coldfire work
       at 11289600 Hz frequency and SYSCLK of UDA1380 can only be 256fs, 384fs, 512fs and 768fs. But in this case SYSCLK
       is 128fs : 11289600 / 88200 = 128  */
      if (!wspll_enable) wspll_on(true);
    }
    else
)
    {
      /* At this case WSPLL clock and SYSCLK has same value and we don't use WSPLL to avoid WSPLL errors */
      if (wspll_enable) wspll_on(false);
    }
#endif

    /* Set WSPLL input frequency range or SYSCLK divider */
    uda1380_regs[REG_0] &= ~0xf;
    uda1380_write_reg(REG_0, uda1380_regs[REG_0] | ent[1]);

    /* Choose 3rd order or 5th order noise shaper */
    uda1380_regs[REG_MIX_CTL] &= ~MIX_CTL_SEL_NS;
    uda1380_write_reg(REG_MIX_CTL, uda1380_regs[REG_MIX_CTL] | ent[0]);
}

/* Initialize UDA1380 codec with default register values (uda1380_defaults) */
void audiohw_init(void)
{
    recgain_mic = 0;
    recgain_line = 0;

    udacodec_reset();

    if (audiohw_set_regs() == -1)
    {
        /* this shoud never (!) happen. */
        logf("uda1380: audiohw_init failed");
    }
}

void audiohw_postinit(void)
{
    /* Sleep a while so the power can stabilize (especially a long
       delay is needed for the line out connector). */
    sleep(HZ);

    /* Power on FSDAC and HP amp. */
    uda1380_write_reg(REG_PWR, uda1380_regs[REG_PWR] | PON_DAC | PON_HP);

    /* UDA1380: Unmute the master channel
       (DAC should be at zero point now). */
    audiohw_mute(false);
}

void audiohw_set_prescaler(int val)
{
    val = mixer_tenthdb2hw(-val);
    uda1380_write_reg(REG_MIX_VOL,
                      MIX_VOL_CH_1(val) | MIX_VOL_CH_2(val));
}

/* Nice shutdown of UDA1380 codec */
void audiohw_close(void)
{
    /* First enable mute and sleep a while */
    uda1380_write_reg(REG_MUTE, MUTE_MASTER);
    sleep(HZ/8);

    /* Then power off the rest of the chip */
    uda1380_write_reg(REG_PWR, 0);
    uda1380_write_reg(REG_0, 0);    /* Disable codec    */
}

/**
 * Calling this function enables the UDA1380 to send
 * sound samples over the I2S bus, which is connected
 * to the processor's IIS1 interface. 
 *
 * source_mic: true=record from microphone, false=record from line-in (or radio)
 */
void audiohw_enable_recording(bool source_mic)
{
#ifdef USE_WSPLL
    if (wspll_enable) uda1380_regs[REG_0] &= ~(ADC_CLK | DAC_CLK);
#endif
    uda1380_write_reg(REG_0, uda1380_regs[REG_0] | EN_ADC);

    if (source_mic)
    {
        /* VGA_GAIN: 0=0 dB, F=30dB */
        /* Output of left ADC is fed into right bitstream */
        uda1380_regs[REG_PWR] &= ~(PON_PGAR | PON_ADCR);
        uda1380_write_reg(REG_PWR, uda1380_regs[REG_PWR] | PON_LNA | PON_ADCL);
        uda1380_regs[REG_ADC] &= ~SKIP_DCFIL;
        uda1380_write_reg(REG_ADC, (uda1380_regs[REG_ADC] & VGA_GAIN_MASK)
                                   | SEL_LNA | SEL_MIC | EN_DCFIL);
        uda1380_write_reg(REG_PGA, 0);
    }
    else
    {
        /* PGA_GAIN: 0=0 dB, F=24dB */
        uda1380_regs[REG_PWR] &= ~PON_LNA;
        uda1380_write_reg(REG_PWR, uda1380_regs[REG_PWR] | PON_PGAL | PON_ADCL
                                   | PON_PGAR | PON_ADCR);
        uda1380_write_reg(REG_ADC, EN_DCFIL);
        uda1380_write_reg(REG_PGA, uda1380_regs[REG_PGA] & PGA_GAIN_MASK);
    }

    sleep(HZ/8);

    uda1380_write_reg(REG_I2S,     uda1380_regs[REG_I2S] | I2S_MODE_MASTER);
    uda1380_write_reg(REG_MIX_CTL, MIX_MODE(1)); 
}

/** 
 * Stop sending samples on the I2S bus
 */
void audiohw_disable_recording(void)
{
    uda1380_write_reg(REG_PGA, MUTE_ADC);
    sleep(HZ/8);
    
    uda1380_write_reg(REG_I2S, I2S_IFMT_IIS);

    uda1380_regs[REG_PWR] &= ~(PON_LNA | PON_ADCL | PON_ADCR |
                               PON_PGAL | PON_PGAR);
    uda1380_write_reg(REG_PWR, uda1380_regs[REG_PWR]);

    uda1380_regs[REG_0] &= ~EN_ADC;
#ifdef USE_WSPLL
    if (wspll_enable) uda1380_write_reg(REG_0,   uda1380_regs[REG_0] | ADC_CLK | DAC_CLK);
#endif

    uda1380_write_reg(REG_ADC, SKIP_DCFIL);
}

/**
 * Set recording gain and volume
 * 
 * type:                params:        ranges:
 * AUDIO_GAIN_MIC:      left           -128 .. 108 -> -64 .. 54 dB gain
 * AUDIO_GAIN_LINEIN    left & right   -128 ..  96 -> -64 .. 48 dB gain
 *
 * Note: - For all types the value 0 gives 0 dB gain.
 *       - order of setting both values determines if the small glitch will
           be a peak or a dip. The small glitch is caused by the time between
           setting the two gains
 */
void audiohw_set_recvol(int left, int right, int type)
{
    int left_ag, right_ag;

    switch (type)
    {
        case AUDIO_GAIN_MIC:
            left_ag = MIN(MAX(0, left / 4), 15);
            left -= left_ag * 4;

            if(left < recgain_mic)
            {
                uda1380_write_reg(REG_DEC_VOL, DEC_VOLL(left)
                                                   | DEC_VOLR(left));
                uda1380_write_reg(REG_ADC, (uda1380_regs[REG_ADC] 
                                               & ~VGA_GAIN_MASK) 
                                            | VGA_GAIN(left_ag));
            }
            else
            {
                uda1380_write_reg(REG_ADC, (uda1380_regs[REG_ADC] 
                                               & ~VGA_GAIN_MASK) 
                                            | VGA_GAIN(left_ag));
                uda1380_write_reg(REG_DEC_VOL, DEC_VOLL(left) 
                                                   | DEC_VOLR(left));
            }
            recgain_mic = left;
            logf("Mic: %dA/%dD", left_ag, left);
            break;
        
        case AUDIO_GAIN_LINEIN:
            left_ag = MIN(MAX(0, left / 6), 8);
            left -= left_ag * 6;
            right_ag = MIN(MAX(0, right / 6), 8);
            right -= right_ag * 6;

            if(left < recgain_line)
            {
                /* for this order we can combine both registers,
                    making the glitch even smaller */
                unsigned short value_dec;
                unsigned short value_pga;
                value_dec = DEC_VOLL(left) | DEC_VOLR(right);
                value_pga = (uda1380_regs[REG_PGA] & ~PGA_GAIN_MASK)
                                | PGA_GAINL(left_ag) | PGA_GAINR(right_ag);

                if (udacodec_write2(REG_DEC_VOL, value_dec, value_pga) < 0)
                {
                    DEBUGF("uda1380 error reg=combi rec gain");
                }
                else
                {
                    uda1380_regs[REG_DEC_VOL] = value_dec;
                    uda1380_regs[REG_PGA] = value_pga;
                }
            }
            else
            {
                uda1380_write_reg(REG_PGA, (uda1380_regs[REG_PGA] 
                                               & ~PGA_GAIN_MASK)
                                            | PGA_GAINL(left_ag)
                                            | PGA_GAINR(right_ag));
                uda1380_write_reg(REG_DEC_VOL, DEC_VOLL(left)
                                                   | DEC_VOLR(right));
            }

            recgain_line = left;
            logf("Line L: %dA/%dD", left_ag, left);
            logf("Line R: %dA/%dD", right_ag, right);
            break;
    }
}


/** 
 * Enable or disable recording monitor (so one can listen to the recording)
 * 
 */
void audiohw_set_monitor(bool enable)
{
    if (enable)    /* enable channel 2 */
        uda1380_write_reg(REG_MUTE, uda1380_regs[REG_MUTE] & ~MUTE_CH2);
    else           /* mute channel 2 */
        uda1380_write_reg(REG_MUTE, uda1380_regs[REG_MUTE] | MUTE_CH2);
}